The Peavey PV115D is a powered, two-way, sound reinforcement speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PV115D is capable of generating peak SPL up to 121 dB. The lightweight yet rugged carpet covered enclosure with stand mount cup facilitates portable use for live music or PA sound. The trapezoidal cabinet has steel handles on either side for ease of portability, and four rubber feet for floor use, while a stand-mount adaptor on the bottom allows for easy speaker stand mounting. Black steel corners provide road protection to the cabinet. A black full-length powder-coated perforated steel grille provides driver protection and a professional appearance.
The PV115D speaker system includes an internal power amp to drive its own speakers, as well as an amplifier output jack to drive another (passive) loudspeaker system. It supplies up to 400 watts peak available power to the internal speakers, and up to 400 watts peak available power to an external 8 ohm speaker system, for a total of 800 watts peak available power. The amplifier is equipped with DDT compression, providing protection from excessive amplifier clipping and the consequent distortion. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. A Contour switch provides some bass and treble lift when used as a background music source, etc. A Link Out 1/4" phone jack provides a pre-level send for linking multiple units together, to be controlled by a single volume control at a master unit.
Two-way powered sound reinforcement enclosure
Peavey exclusive 15" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
RX14 titanium diaphragm compression driver, with 1.4" titanium diaphragm
Constant directivity tweeter horn, 60 X 40
Class-D powered system with up to 800 W total peak available power
DDT compression/anti-clipping protection
Signal input via combo female XLR/1/4" phone jack, providing balanced operation
Contour switch provides bass and treble lift
Heavy-duty crossover network with high frequency driver protection
Carpet covered trapezoidal enclosure
Steel handles and protective corners
Full-coverage heavy-duty perforated steel grill with powder coat finish
Steel pole mount adaptor
T-Nut speaker mounting
A loudspeaker with unparalleled performance and value.
SPECIFICATIONS
PV 115D 15" Powered Speaker
Frequency Range 1 meter on-axis, swept-sine in 1/2 Space environment: -10 dB: 40 Hz to 21 kHz
Frequency Response 1 meter on-axis, swept-sine in 1/2 Space environment: 66 Hz to 17 kHz (±3 dB )
Sensitivity: (1w/1m) 95 dB
Maximum Peak SPL: 121 dB
Transducer Compliment: Transducer Compliment: Heavy-duty 15" woofer with 2 3/8" voice coil & 50 oz. magnet. RX14 1.4" titanium diaphragm dynamic compression driver, on a Constant Directivity 60 X 40 horn.
Nominal Coverage Pattern: 60 degrees horizontal by 40 degrees vertical
Electro-acoustic Crossover Frequency: 3 kHz
Input Connections: One combo female XLR/ 1/4" phone jack providing balanced or unbalanced operation.
Enclosure Materials & Finish: Trapezoidal, black carpet covered
12mm MDF, black powder-coated full length perforated steel grille.
Mounting or Suspension: Steel 1 3/8" pole-mount cup for stand
mounting, four rubber feet for floor use.
NOTE: This unit is not designed for overhead suspension!
Dimensions (H x W x D):
Front: 32.25 in. x 18.83 in. x 14.75 in.
Rear: 32.25 in. x 11.25 in. x 14.75 in.
Weight: 56 Lbs. (25.4 kg)
ELECTRONICS AND AMPLIFIER SPECIFICATIONS:
Power Amp Rating, Total Power Output: 400 watts internally (8 ohms), Continuous Power: 400 watts into 4 ohms @ less than 1%
distortion (when running an additional speaker)
Electronic Input Impedance (Nominal): 2.7 k ohms balanced (XLR or
1/4"), 1.35 k ohms unbalanced 1/4".
Infrasonic filter protection: 24 dB/octave roll-off
Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz
Hum and Noise: Greater than 90 dB below rated power
DDT Dynamic Range: Greater than 14 dB
THD and IM: Typically less than 0.5 %
Damping Factor: Greater than 400 @ 1000 Hz, 8 Ohms
Power requirements of Peavey PV2015D System: Nominal 370
Watts, Voltage and Frequency Ranges: 100-120 VAC, and 220 -
240VAC, at 50- 60 Hz
Fuse Type:
For 100-120 VAC USE: International fuse classification T6.3AL . In
the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.
For 220-240 VAC USE: International fuse classification T3.15AL .
This is a cartridge style 5 x 20 mm size time-delay fuse with a 3.15
amp 250V rating.
Custom Guitar's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling
and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a
complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
Unexpected and unintentional spills, drops and cracks
Normal wear and tear
Power surges
Dust, internal heat and humidity
Other plan features include:
For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
For products under $200 experiencing the above failures, a Custom Guitar's Friend gift card will be issued for the full price of the product + tax.
Shipping fees covered if required for repair or replacement
Plans are transferable in the event merchandise is sold
Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.
Displaying reviews 1-9
Back to top
Ok partially my fault for buying an open box item but when it says Mint you would expect just that. As soon as I got it off the ups truck plugged it in plugged in mic power light on no sound tried another mic and cable nothing. You would think they would have checked it before selling it. There was no damage during shipping. Now I get to wait 7 days to ship it back and get a refund. then I can buy another, thats the best they can do at MF. I can buy it elsewhere and get better service. Bye MF ill spend my money elsewhere.
Peavey PV 115D 15" Powered Speaker
.great sounding speakers at a decent price the ability to power a second speaker is an added bonus
Peavey PV 115D 15" Powered Speaker
.The beast is heavy but it is awesome. I needed something with multiple inputs but I have a mixer so I ended up getting this since it has no effects and could just amplify the sound that was coming out of my mixer.
The thing is killer and I ever got a a cheaper used on and its great. Highly recommend it.
Peavey PV 115D 15" Powered Speaker
.Not much power for a "400" watt powered speaker, clips real easy also, do youself a favor and get a better powered speaker, or power amp and speaker combo.
Peavey PV 115D 15" Powered Speaker
.I really don't know what's up with guys saying this speaker is heavy. Lol one handed carry for most adults. I easily put it on top of a fully extended speaker stand by myself. Best thing is the sound is solid and powers another speaker. I use it to power an older passive SP2 rated for 300w that sounds great but is huge(maybe that is why the new speaker seems light) I plan on buying a second to power my other SP2 as well and have a really good inexpensive system. It would power their sub that is rated for 400w as well because it has a crossover to shed the frequencies it doesn't need. My partner in a duo has K12s and they are some better and lighter but honestly no audience will notice or care about the difference. These don't sound cheap. I wish the 12" version powered a passive speaker too. That would be more useful for covering vocals and guitar, but this does the trick nicely. I'm not positive, but it seems Peavey rates their speakers for the real world as this 400w speaker keeps up with most that are rated as twice the power. Two of these pushing two passive cabs is a good deal of air moving for medium clubs. I highly recommend and have been at it for over 30 years now.
Peavey PV 115D 15" Powered Speaker
.
(
Was this review helpful? Yes / No
- You may also flag this review
A little heavy if you are going to be lugging it around but I'm sure it will take some road abuse and keep performing..........
Peavey PV 115D 15" Powered Speaker
.I use the pv115d and the pv115 for little neighborhood dj/kj parties and downtown street karaoke events (just for fun) and they are really really loud and very clear. (More speaker than I really needed) but I got them at a good deal. These are excellent speakers for any venue, outdoors or indoors.
Peavey PV 115D 15" Powered Speaker
.Great sound and value, but they are heavy. I had to send one back to Peavey, because it was too far to nearest service center, but they repaired it under warranty and sent it back in about 2.5 weeks. Great customer service. The sound quality is excellent especially if you don't have to move them around much due to weight. The awesome thing about these is that it has a separate amp section that will power a passive speaker without any loss to the internal speakers. Its like getting 2 powered speakers for 1.
Peavey PV 115D 15" Powered Speaker
.I am astonished at the quality and sound of this speaker. Peavey is miles ahead of any other manufacturer by offering a second internal amp for an external speaker without sacrificing power to the the internal. If you want great bass and plenty of crisp highs go for it. It's heavy but that' why the sound is so great. It gives me the sound that I am used to without having to bring the 80lb rack. Peavey stuff is still built to last. I will be getting a second one soon.
Peavey PV 115D 15" Powered Speaker
.
English
