The Fishman Bluegrass Series Rare Earth Banjo Pickup features a quiet humbucking coil, a powerful neodymium magnet assembly, and a specially designed preamp to strengthen and preserve the natural sound of your banjo. Fits dual coordinator rod banjos and may be modified to fit single rod banjos. Fishman recommends professional installation of the Bluegrass banjo pickup.
Let your banjo be heard Fishman-style today!
SPECIFICATIONS
Bluegrass Series Rare Earth Banjo Pickup
Pickup Coil: Stacked Humbucking
Preamp: Low Noise, Discrete, 0 Feedback Circuit
Nominal Output: -10dBu
Noise: -94dBu, A Weighted
Output Impedance: 3k Ohm
Minimum Recommended Load Impedance: >10 k Ohm
Power: 9 V Alkaline Battery
Battery Life: Over 5000 Hours
Displaying reviews 1-5
Back to top
I bought the Fishman Bluegrass Series Rare Earth Banjo Pickup because I switch between several instruments during a set. I'm the texture guy in the band, so I'm constantly switching between guitar, mandolin, and banjo. The problem was, I had 1/4" jacks in my guitars and mando, but not in my banjo. Several times, the sound guy would miss my first few notes because he forgot to turn on the mic. After I installed it (fairly easy, but some soldering is required) I plugged it in, and with a few adjustments was very pleased with the sound. I wanted the bright sound of the banjo to come through, and I was not disappointed. The only issue I have is that there is no volume control and the sound man sometimes has trouble getting enough signal compared to my other instruments. That's why I put 4 stars on 'features.' If the banjo is all you play, this won't be a problem. I will probably be installing a volume control next.
Fishman Bluegrass Series Rare Earth Banjo Pickup
.I purchased the Fishman Bluegrass Series Rare Earth Banjo Pickup for my Epiphone Banjo. The installation, though involved, was pretty straight forward. The little metal shim that attaches to the head was very corroded in the unit that I received, but Fishman sent me out a couple that arrived a couple days later. The tecch at Fishman was great and offered lots of good techinical info about the product in his reply email. Take a close look at the solder tabs on the jack before making any connections as the two shorter tabs are close in size and location. Not a hard install, just take your time. Sounds great plugged into a mixing board with a DI box and through a guitar amp.
Fishman Bluegrass Series Rare Earth Banjo Pickup
.This is by far the best banjo pick up on the market. I am a luthier and install many pick ups on a variety of instruments. This banjo pick up retains the acoustic banjo sounds and does not sound like a sitar as often banjo pick ups do.
Fishman Bluegrass Series Rare Earth Banjo Pickup
.I have been through several pickups and clip on microphones I prefer the Fishman it's noise free and captures the actual sound of the banjo fairly well and better than the other pickups, Jones Hatfield, K&K, Schatten, that I have tried. Somebody on Banjo Hangout suggested placing the pickup 1/4" inch in front of the middle foot of the bridge under the head and I had good results with that. If you don't have good soldering skills you want to find somebody who does because the wires are super tiny and what you solder to is also small.
Fishman Bluegrass Series Rare Earth Banjo Pickup
.I've used all types of banjo pickups, from piezo to internal mics. This one was relatively easy (if you know how to solder) to install, and it is by far the best sounding, most versatile and accurate pickup I've ever seen for a banjo. I play 5 string for both public and private gigs....all types of music with my Gibson Mastertone, and really enjoy the quality of sound this puts out. It is a bit spendy, but you don't need to use another preamp with it. I would definitely recommend the Fishman to my closest friend!
Fishman Bluegrass Series Rare Earth Banjo Pickup
.
English
